Xalphas - conkyrc

From Lapis Wiki

Jump to: navigation, search

olorolr 

# Conky sample configuration
#
# the list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.

# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Set conky on the bottom of all other applications
on_bottom yes


# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=8

# Text alpha when using Xft
xftalpha 0.8

# Print everything to stdout?
# out_to_console no

# MPD host/port
# mpd_host localhost
# mpd_port 6600
# mpd_password tinker_bell
# mpd_host Muddel


# Print everything to console?
# out_to_console no

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 1.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window no

# Use pseudo transparency with own_window?
own_window_transparent no

# If own_window_transparent is set to no, you can set the background colour here
#own_window_colour hotpink

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 280 5

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 8

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color black

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 12
gap_y 10

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes

#   mldonkey_hostname     Hostname for mldonkey stuff, defaults to localhost
#   mldonkey_port         Mldonkey port, 4001 default
#   mldonkey_login        Mldonkey login, default none
#   mldonkey_password     Mldonkey password, default none

# boinc (seti) dir
# seti_dir /opt/seti

# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT
$nodename - $sysname $kernel on $machine
$hr
${color lightgrey}Time ${time %d/%m/%y - %H:%M:%S} Uptime:$color $uptime
${color darkgrey}$hr
${color lightgrey}CPU Usage:${color white} $cpu% ${cpubar}
${color lightgrey}${cpugraph 000000 000000}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% ${membar}
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes  ${color grey}Running:$color $running_processes

${color darkgrey}$hr
${color lightgrey}MPD:${mpd_artist} - ${mpd_title}
${color lightgrey}${mpd_bar}
${mpd_status} / ${mpd_bitrate} kbps / ${mpd_vol}% volume

${color lightgrey}Networking:
 Down:${color #8844ee} ${downspeed eth0} k/s${color lightgrey} ${offset 80}Up:${color #22ccff} ${upspeed eth0} k/s
${color #0000ff}${downspeedgraph eth0 32,150 ff0000 0000ff} ${color #22ccff}${upspeedgraph eth0 32,150 0000ff ff0000}

${color}File systems:
${color}Name    Size     Free
${color darkgrey}$hr
/           $color${fs_size /}${alignr 140}${fs_free /} ${alignr 140}${fs_bar /}
/mnt/yedek  $color${fs_size /mnt/yedek}${alignr 140}${fs_free /mnt/yedek} ${alignr 140}${fs_bar /mnt/yedek}
${color darkgrey}$hr
${color}Arch Yeni Paketler${color slate grey}
${execi 300 ~/.conky-rss.sh}${color }
${color darkgrey}$hr
${color #0077ff}Port(s)${alignr}#Connections
$color ALL:     ${alignr}$color ${tcp_portmon 1 65535 count}
$color mpd:     ${alignr}$color ${tcp_portmon 6600 6600 count}
$color sshd:    ${alignr}$color ${tcp_portmon 22 22 count}
$color torrent: ${alignr}$color ${tcp_portmon 49152 65535 count}
${color #0077ff}Remote Address ${alignr} Local Service/Port$color
${tcp_portmon 1 65535 rhost 0} ${alignr} ${tcp_portmon 1 65535 lservice 0}
${tcp_portmon 1 65535 rhost 1} ${alignr} ${tcp_portmon 1 65535 lservice 1}
${tcp_portmon 1 65535 rhost 2} ${alignr} ${tcp_portmon 1 65535 lservice 2}
${tcp_portmon 1 65535 rhost 3} ${alignr} ${tcp_portmon 1 65535 lservice 3}

${color darkgrey}$hr
${color}Name              PID     CPU%   MEM%
${color darkgrey}$hr
${color}CPU usage
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}

${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}


#BURADAN SONRASI conky-rss.sh OLARAK /home DİZİNİNE GELECEK.

#!/bin/bash
# RSS Feed Display Script by Hellf[i]re v0.1
#
# This script is designed for most any RSS Feed.  As some feeds may not be
# completely compliant, it may need a bit of tweaking
#
# This script depends on curl.
# Gentoo: emerge -av net-misc/curl
# Debian: apt-get install curl
# Homepage: http://curl.haxx.se/
#
# Usage:
# .conkyrc:    ${execi [time] /path/to/script/conky-rss.sh}
#
# Usage Example        
#        ${execi 300 /home/youruser/scripts/conky-rss.sh}


#RSS Setup
URI=http://www.archlinux.org/rdf_feed.php     #URI of RSS Feed
#URI=http://www.foxnews.com/xmlfeed/rss/0,4313,1,00.rss    #URI of RSS Feed
LINES=6                            #Number of headlines



#Environment Setup
EXEC="/usr/bin/curl -s"                #Path to curl

#Work Start
$EXEC $URI | grep title |\
sed -e :a  -e 's/<[^>]*>//g;/</N' |\
sed -e 's/[ \t]*//' |\
sed -e 's/\(.*\)/ \1/' |\
sed -e 's/\.//' |\
sed -e 's/\"//' |\
sed -e 's/\"//' |\
head -n $(($LINES + 2)) |\
tail -n $(($LINES))
Retrieved from "http://wiki.linux-sevenler.org/index.php/Xalphas_-_conkyrc"